How to calculate the expansion area of the cabinet: Detailed explanation of the calculation method and hot topics
Recently, home decoration and customized furniture have become hot topics across the Internet, especially the calculation method of the expansion area of the cabinet, which has triggered widespread discussion. This article will analyze in detail the calculation method of the expansion area of the cabinet based on the hot topics in the past 10 days, and provide structured data to help readers better understand and apply.
1. Calculation method of cabinet expansion area
The expansion area of the cabinet body refers to the sum of the plane areas of all the boards of the cabinet body, which are usually used for quotation and material estimation of customized furniture. The following are the specific calculation steps:
| Calculation steps | illustrate |
|---|---|
| 1. Measure the cabinet size | Measure the length, width, height of the cabinet body, and the size of the internal partition. |
| 2. Calculate the area of a single plate | Area of each plate = length × width. |
| 3. Summary of all plate areas | Add the areas of all the plates to obtain the expanded area of the cabinet. |
| 4. Consider the loss rate | The loss rate is usually increased by 5%-10% to ensure adequate material. |
2. Relationship between recent hot topics and the area of the cabinet expansion
In the past 10 days, the hot topics on home decoration and custom furniture on the entire network have focused on the following aspects:
| Hot Topics | Related content |
|---|---|
| 1. Choice of environmentally friendly materials | The calculation of the expansion area of the cabinet directly affects the amount of material. The price of environmentally friendly materials is relatively high, and accurate calculation can save costs. |
| 2. The cost-effectiveness of customized furniture | The expanded area is an important basis for custom furniture quotations. Consumers can compare the quotations of different merchants through calculations. |
| 3. Utilization of small apartment space | Accurate calculation of the expansion area helps optimize cabinet design and maximize the use of limited space. |
| 4. DIY furniture production | The calculation of expanded area is the basis for DIY furniture production, and the popularity of DIY topics has increased recently. |
III. Sample calculation
The following is a specific example of calculating the expansion area of the cabinet:
| Plate name | Dimensions (Length × Width) | Area (㎡) |
|---|---|---|
| Side panel | 2m × 0.6m | 1.2 |
| roof | 1.5m × 0.6m | 0.9 |
| Bottom plate | 1.5m × 0.6m | 0.9 |
| Partition board | 1.4m × 0.5m | 0.7 |
| Total area | - | 3.7㎡ |
4. Things to note
1.Plate thickness: When calculating the spread area, the thickness of the board is usually not considered, but it is important to note that the prices of boards of different thicknesses may be different.
2.Hardware and decoration: The expanded area is calculated only by the board area, and the hardware and decoration costs must be calculated separately.
3.Merchant quotation method: Some merchants quote prices based on projected area and need to compare them with the expanded area quotation to avoid being misleading.
5. Summary
Calculation of the expansion area of the cabinet is an important part of the process of customizing furniture. Accurate calculation can not only save material costs, but also optimize the design plan. In light of recent hot topics, consumers should also pay attention to factors such as environmentally friendly materials, cost-effectiveness and space utilization when calculating the expansion area to make smarter choices.
Through the detailed analysis and structured data of this article, I believe that readers have a clearer understanding of the calculation method of the expansion area of the cabinet. In actual operation, it is recommended to flexibly apply these methods based on specific needs and merchant quotations.
check the details
check the details
en
