How to adjust 2k white paint: a hot topic on the Internet and a practical color adjustment guide
Recently, hot topics in the fields of home decoration and car color modification have focused on"2K White Paint Mixing"on. Many users focus on how to accurately mix white paint to achieve the desired effect. This article will combine the hot content of the entire network in the past 10 days to provide you with structured data and detailed steps.
1. Background of hot topics
According to search data, the following are the popular discussion directions related to "2K white paint" in the past 10 days:
| Topic keywords | Search popularity index | Main application scenarios |
|---|---|---|
| 2K white paint mixing ratio | 85% | Car spray painting, furniture renovation |
| Matte white paint vs glossy white paint | 72% | Indoor walls, industrial equipment |
| Environmentally friendly 2K white paint | 68% | Children's room, medical equipment |
2. Core data of 2K white paint deployment
The following are the standard mixing parameters (volume ratio) of mainstream brands of 2K white paint:
| Paint type | Main ingredient | curing agent | Thinner | Applicable temperature |
|---|---|---|---|---|
| Standard glossy white | 2 servings | 1 serving | 10-15% | 15-25℃ |
| Low temperature quick drying type | 2 servings | 1 serving | 5-8% | 5-15℃ |
| High coverage matte white | 2 servings | 1 serving | 8-12% | 18-28℃ |
3. Detailed explanation of color mixing steps
1.Basic preparation: Ensure the working environment is ventilated and wear protective equipment (gloves, goggles, etc.).
2.Material ratio: Select the corresponding formula according to the above table and use an electronic scale to accurately weigh each component.
3.Mix and stir: First add the main agent and curing agent, mix with a cross-shaped stirring method for 3 minutes, then add the diluent to adjust the viscosity.
4.Viscosity test: Measured using Ford Cup No. 4, the ideal viscosity is 18-22 seconds (25°C environment).
4. Solutions to common problems
| Problem phenomenon | Possible reasons | Solution |
|---|---|---|
| Paint surface turns yellow | Too much curing agent or improper storage | Reconstitute according to standard proportions and store raw materials away from light |
| Drying too quickly | Thinner evaporates too quickly | Switch to slow-drying thinner |
| Poor adhesion | Incomplete base treatment | Re-sand and clean the substrate |
5. Latest industry trends
According to the latest report from the Coatings Association, 2K white paint technology will present three major innovation directions in 2023:
1. Application of nanoscale titanium dioxide (increase covering rate by 30%)
2. Development of water-based curing system (reducing VOC emissions by 50%)
3. Intelligent color matching system (accurate color matching through APP)
Things to note:It must be used within 4 hours after preparation. It is prohibited to mix products of different brands. It is recommended to test the effect on a small sample panel first before constructing on a large area.
check the details
check the details
en
